Page EN-33
Installation, connection and initial commissioning
Installation
NOTICE
Risk of damage to property!
Selecting the wrong screws can dam-
age the worktop.
■
Only use the supplied screws or screws
of the appropriate length.
• Only install the dishwasher underneath a
continuous worktop which is joined to the
units adjacent to the dishwasher.
• Maintain sufficient distance from the walls
and adjacent appliances. The measure-
ments of the recess must at least corre-
spond to the details in the diagram above.
Free-standing
1. Switch the fuse off.
2. Remove cardboard, polystyrene and ad-
hesive strips from the inside, if you have
not already done so.
3. Loosen both screws on the reverse side
of the covering panel and remove them.
Inlet/outlet area
and electrical con-
nection.
90°
600 mm
820 mm
100 mm
580 mm
80 mm
90°
Recess dimensions
