Start-up
Page EN-27
8. Screw the slides back onto the appliance
door.
9. Press the covers (20) onto the slides.
10. Check that the doors can open and close
easily and that the they seal properly
when closed.
If necessary, adjust the position of the re-
frigerating appliance and of the slides and
runners.
Screw the appliance to the built-in
cabinet
1. Check whether the doors can be opened
and closed properly.
(25)
2. Screw in the top of the appliance with
three short screws (25).
(24)
3. Screw in the bottom of the appliance with
the two long screws (24).
(26)
4. With the appliance doors open, press the
sealing strip (26) into the gap between the
fridge and the built-in cabinet.
(27) (25)
5. Finally, screw the two mounting brackets
(27) between the upper and lower door
with the built-in cabinet. Use short screws
(25) for this.
Installation is now complete.
Cleaning before use
To remove the odour that comes with all new
appliances, clean the appliance before using
it (see “Cleaning the fridge compartment” on
page EN-20) and (see “Defrosting and clean-
ing the freezer” on page EN-21).
