page EN-14
Operating the oven
Setting the time
You must set the time when using the oven
for the first time or after a longer power cut.
The display will show
00:00
. The time is dis-
played in 24-hour format.
1. Press and hold the sensor for approxi-
mately 3 seconds.
In the display, both the zeros will flash for
the hour display.
2. Tap the sensor / or swipe over the
slider to set the number of hours.
3. To switch to the minute display, tap the
sensor.
4. Tap the sensor / or swipe over the
slider to set the number of minutes.
5. To save the time, tap the sensor .
The colon between the hour and minutes
will flash.
Switching the oven on/off
As soon as a power supply has been con-
nected, the oven will be in standby mode. In
order to switch
– the oven on, tap one of the sensors , ,
, or .
The display will show the current function.
– to standby mode, tap the sensor .
– off the oven, you must pull the mains plug
out of the socket or switch off the applica-
ble electric circuit.
If the oven door is opened during oper-
ation, the operation is interrupted.
Selecting a function
“Function” describes the method of heating.
Your machine is equipped with the following
functions:
Baking function
Steam function
Baking function with steam supply
Automatic function
Further information on the individual settings
can be found
– in the tables on the next page,
– in the enclosed brochure “Baking, roasting
and cooking”.
• Tap one of the sensors , , , .
The display will show the function.