Set-up and start-up
Page EN-37
5. Clean the turntable (9) and the roller
ring (8) in the dishwasher or by hand.
6. Clean the grill rack (10) by hand with a
small amount of dishwashing liquid.
Inserting the turntable
1. Place the roller ring (8) in the recess in
the cooking chamber floor.
2. Place the turntable drive (7) in the recess
in the middle.
3. Place the turntable (9) with the grooved
side facing down on the roller ring (8) and
turn it until its centre clicks into place on
the turntable drive (7).
Connecting the appliance
1. Check that the connection voltage of the
appliance corresponds to the mains volt-
age in your home (see type plate on the
back of the appliance).
2. Connect the appliance to a properly in-
stalled protective contact socket with suffi-
cient fuse protection.
You will hear a beep and the display (12)
will indicate
0:00
.
Heating up the appliance for
the first time
A slight odour may be produced during first
use. This is non-toxic and disappears after a
short moment.
• Heat the appliance for 10 minutes at
200 °C in convection mode.
