Operation
Page EN-31
Using the “Cake” automatic
program
The “Cake” automatic program (
A9
) is spe-
cial as it works with a preheating function and
the appliance door must be opened after pre-
heating.
1. Use the control dial (18) to set the auto-
matic program “
A9
”.
The indicator will flash, a bar will appear
beneath the
A
and the indicators
and
and the indicator
at the bottom of
the display (12) will appear.
2. Press the “Start/+30sec./Confirm” but-
ton (17).
“
A9
” stops flashing.
3. Press the “Start/+30sec./Confirm” but-
ton (17) again.
The preheating process will start.
The indicators
and
and the bar be-
neath the
A
will start to flash.
During preheating, all bars will start to illu-
minate gradually from the bottom left of the
display up to the 160 °C bar. This shows
the progress of the preheating.
Once preheating is complete, two beeps
will sound.
4. Open the appliance door (5) and place
the cake in the cooking chamber (1).
Open the appliance door (5) as well
if you have put the cake in the cook-
ing chamber at the beginning of the
preheating time.
5. Close the appliance door (5) again and
press the “Start/+30sec./Confirm” but-
ton (17).
The baking process will start.
The display (12) counts down the cooking
time from 60:00; the indicators
and
and the 160 °C bar at the bottom of the
display (12) will flash.
Once the baking time has elapsed, five
beeps will sound.
