Page EN-31
Installation, fitting and connection
Installation
NOTICE
Risk of damage!
By selecting incorrect screws, you may
damage adjacent kitchen units.
■
Use the screws which are supplied in
the delivery or screws of an appropri-
ate length.
1. Disconnect the power supply at the fuse
box.
2. Remove cardboard, polystyrene and ad-
hesive strips from the inside of the dish-
washer, if you have not already done so.
(c)
3. Affix the enclosed moisture barrier
tape (c) to the underside of the worktop.
In this way, you will avoid damage to the
work surface as a result of hot steam
which may be emitted from the dishwash-
er if the dishwasher door is left open.
(e)
4. Insert the two mounting brackets (e) into
the front slots on the top of the dishwash-
er so that you can screw the dishwasher
to the worktop subsequently.
(d)
5. Remove the protective films from the side
end profiles (d).
6. Affix the end profiles to the left and right
edges of the dishwasher. This will prevent
a crack being visible between the dish-
washer and the adjacent kitchen
cupboards.
7. Push the dishwasher into the recess.
