Page EN-23
Dishwasher operation
Changing the dishwasher
programme
CAUTION!
Risk of scalding!
If you open the dishwasher door,
hot steam will come out.
■
Maintain a suffi cient distance from
the door and do not hold your head
or upper body directly above the
open door.
■
Keep children and pets away from the
appliance when opening the door.
■
Make sure that children do not open
the door during operation.
You can interrupt an active dishwashing pro-
gramme at any point and start a new one.
However, do not forget to add extra dish-
washer detergent if the programme has al-
ready been running for a longer period and
the cover of the dishwasher detergent com-
partment is already open.
1. Open the dishwasher door just a crack
initially and wait until the spraying arm
has come to a stop and the steam has
dispersed.
Then open the dishwasher door com-
pletely. When you open the dishwasher
door, the dishwasher programme is auto-
matically paused.
2. If required, add extra dishwasher
detergent.
3. Keep the
P
(3) button held in until the
next programme number appears in the
display.
4. Then select the new programme using
the
P
(3) button and additional extra op-
tions as previously described.
5. Close the dishwasher door.
The newly selected programme will start
after a few seconds.
Activate/deactivate automatic
door opening
The “Automatic door opening” function is ac-
tivated as standard.
• In order to
– deactivate the ‘Automatic door open-
ing’ function, press and hold the
P
(3)
and (4) buttons simultaneously until
the
(9) indicator goes out. The appli-
ance door remains locked when the pro-
gramme has reached the drying phase.
– activate the ‘Automatic door opening’
function, press both buttons again and
hold in until the
indicator (9) appears
in the display.
Delayed start time
The washing cycle will normally begin as
soon as the dishwasher door has been
closed. However, you can delay the start of
the programme by up to 24 hours.
• Before the programme begins, push the
(4) button as many times as required
until the desired delay time (6) appears
(
01
...
24
).
The programme will start automatically af-
ter the delay period has finished.
Half load
Select the option “Half load” if you only need
to wash up to a maximum of 6 place settings.
The water and power consumption is reduced
through this setting.
• Press the ½ (2) button.
The ½ (10) indicator lights up.
This option can not be switched on
using programme
P6
.
