Page EN-13
Dishwasher detergents, rinse aids and dishwasher salts
Adding dishwasher salt
NOTICE
Risk of damage!
You may damage the dishwasher and
its stainless steel surface by using dish-
washer salt in an improper manner.
■
Only use regenerating salt which is
specifi cally intended for dishwashers.
■
Always wipe away split dishwasher
salt immediately with a damp cloth.
■
Immediately after adding the dish-
washer salt, launch a dishwashing
programme.
You do not need to add dishwasher
salt to the dishwasher salt dispenser if
– you are exclusively using multitabs
which already contain dishwasher salt,
– the water hardness in your area is in the
0–5° dH range.
Add dishwasher salt:
– prior to using the dishwasher for the first
time,
– if the “Adding dishwasher salt” display (13)
is illuminated.
(23)
1. Remove the lower dish rack (18).
2. Turn the cover on the dishwasher salt dis-
penser (23) anticlockwise and remove it.
3. Upon first use: Add 1.5 l water to the dish-
washer salt dispenser so that the dish-
washer salt does not clump.
4. Place the filling funnel supplied over the
dispenser opening.
5. Add dishwasher salt up to the edge of the
compartment.
6. Stir the dishwasher salt using the end of a
spoon or similar.
7. Turn the cover of the dishwasher salt dis-
penser (23) clockwise up to the stop.
8. Replace the lower dish rack (18).
9. Start a dishwashing programme straight
away or carry out a test run when using
for the first time see „Test run“ on page
EN-29).
