Page EN-28 Care and maintenance
Cleaning the dispenser
1 . Fold the appliance lid (15) upwards .
(25)
(16)
2 . Press the (25) button and remove the dis-
penser (16) .
3 . Wash out all compartments, wipe down or
brush out thoroughly .
4 . On the reverse side, remove the plug for
the fabric softener and bleach compart-
ment and remove all residues . Then re-
place the plug .
5 . Re-attach the dispenser (16) to the appli-
ance lid and close the appliance lid .
Checking the water intake
filter, cleaning and replacing
the gasket
NOTICE
Risk of damage to property!
Improper handling of the appliance
may result in damage.
■
Turn off the water intake tap after
each use, before cleaning the wa-
ter intake filter or replacing the gas-
ket. Otherwise there is a risk of water
damage.
■
Close the valve before cleaning the
filter or replacing the gaskets.
■
Check and clean filters and gaskets
regularly.
■
Replace defect filters and gaskets im-
mediately. Never operate the appli-
ance without filters and gaskets.
There are filters in the appliance’s water inlet
which prevents foreign particles from entering
the appliance .
Check and clean the filter every 3 months or
if the appliance is not getting enough water
despite the tap being open completely .
1 . Switch off the appliance, take the mains
plug out of the socket and turn off the tap .
2 . Unscrew the water inlet hose from the valve .
3 . Clean the filter with a small brush .
4 . Screw the water inlet hose onto the valve
again .