Page EN-18
Modes/standard functions
Modes/standard functions
Before getting started
• Read chapter ‘Safety’ from page EN-5
and observe all the safety notices.
• Set up and connect the appliance as de-
scribed from page EN-34.
• Thoroughly clean the oven as described
from page EN-36.
• You have set the time as described on
page EN-16.
Starting, interrupting,
continuing and ending
CAUTION!
Risk of burns!
Elements, sides, baking trays, etc. get
very hot during operation.
■
Accessible parts may become hot
during use. Keep small children away.
■
Avoid direct contact.
■
Only touch the oven door by the han-
dle.
■
Hot steam can flow from the extrac-
tion hood when the oven is in use.
Take care when opening the oven
door!
CAUTION!
Fire hazard!
■
Never leave the oven unattended
while grilling!
■
Fatty foods can catch fire.
■
Do not cover cakes or roasts with bak-
ing paper during cooking.
■
Do not allow food, baking parchment
and aluminium foil to come into con-
tact with the heating elements.
■
Do not store temperature-sensitive,
combustible or flammable objects in
the oven.
■
Do not leave the oven unattended
while cooking food in oil and grease
or with alcohol. The foods may ignite.
(2)
(1)
You have selected the function and config-
ured the other settings. In order to
• start/continue the operation, tap the
sensor (2).
The lighting will switch on; the oven will
heat up. Up to eight bars below the tem-
perature display show the progress of the
heating process.
• interrupt the operation,
– tap on the sensor (2) once again.
The temperature display will flash to in-
dicate that the oven is no longer heating
(up).
– open the oven door. After closing the
oven door, the heating process must be
continued with the sensor.
• to end the operation,
– tap the sensor (13).
The oven is now in stand-by mode and
is no longer heating.
– you don’t have to do anything if a cook-
ing time was set. In this case, the heat-
ing process will end automatically. You
will hear 5 signal tones and the displays
will show
End
.
Function, temperature and cooking
time can be changed at any time dur-
ing the cooking process (except of automat-
ic programmes). The change will take eff ect
approx. 6 seconds after the last sensor op-
eration.
Summary of Contents for 6467 5200
Page 42: ...Technische Daten Seite DE 42 ...
Page 84: ......
