Page EN-10
Device components/operating elements
The nozzles
Your appliance has several nozzles each in-
tended for specific purposes.
The floor nozzle
(29)
(18)
You will work with the floor nozzle (18) most
of the time as it is designed for large, flat sur-
faces.
Best vacuuming results are achieved when
you adapt the appliance to the floor surface
using the foot selector switch (29).
– For short-pile or smooth floors such as
needle felt, PVC, parquet or tiles:
Move the foot selector switch to position
.
– For long-pile rugs/carpets:
Move the foot selector switch to position
.
The foot selector switch (29) can also
be readjusted during operation.
The 2-in-1 tool
(20)
(19)
(21)
The 2-in-1 tool (19) comprises the crevice
nozzle (21) and the combi nozzle (20).
The crevice nozzle
(21)
The crevice nozzle (21) is suitable for vac-
uuming material folds, joints, corners and
niches that cannot be reached with the floor
nozzle.
The combi nozzle
(20)
The combi nozzle (20) can be used as a fur-
niture brush or upholstery nozzle.
The combi nozzle (20) can only be
used together with the crevice noz-
zle (21).
– Using the combi nozzle (20) as a furniture
brush, you can dust books or delicate ob-
jects such as picture frames.
– Using the combi nozzle (20) as an uphol-
stery nozzle, you can vacuum upholstered
furniture and mattresses.
Using as a furniture brush
(21)
(20)
(31)
1. Insert the crevice nozzle (21) on the up-
holstery nozzle end (31) of the combi
nozzle (20).
2. Attach this combination to the telescopic
tube (17) or directly to the handle (12).
