Hanseatic 2151 7334, User Manual

Page: 51 / 66

Additional functions Page EN-17
Requirements:
– The time is set correctly.
– You have set the cooking time (see the pre-
vious section, steps 1 to 3.).
1. Tap the sensor (11).
The symbol will appear on the display
and the hour display will flash.
2. Tap the sensor (6) or swipe over the
slider (7) to set the number of hours.
3. To switch to the minute display, tap the
symbol .
4. Tap the sensor or swipe over the slid-
er to set the number of minutes.
5. To save the set end of cooking time, tap
the sensor again .
The display shows the selected function,
set temperature, (remaining) cooking time
and the symbol
.
6. Tap the sensor (2).
The oven will switch on at the calculated
time and will stop heating at the end of
the cooking process.
You will hear five
signal tones and the display will show
“
END
.”
To end the cooking process early, switch
the oven off with the sensor
(13).
Timer
(1)
(12)
Your oven is also equipped with a timer. You
set a specific period, just as you would with
an egg timer. Once the period has expired, a
tone sounds. You can set a duration of one
minute up to 23:59 hours.
Please note that the countdown timer does
not switch the oven on or off. You can also
use the countdown timer when the oven is
not switched on.
1. Tap briefly on the sensor (12).
The symbol will appear on the display
and the hour display will flash.
2. Tap the sensor (6) or swipe over the
slider (7) to set the number of hours.
3. To switch to the minute display, tap the
symbol .
4. Tap the sensor or swipe over the slid-
er to set the number of minutes.
5. To save the set cooking time, tap the
sensor again.
The display will show the set time and the
residual time respectively. Once the pre-
set cooking duration has elapsed, you will
hear 9 signal tones and the display will
once again show the time