13
Control panel
5.10 Setting filter or purge cycle frequency
The display will show FFXX, “XX” representing the number of cycles per day. Use the
arrow keys to adjust the frequency. Use the Lights key to jump to the next parameter,
economy mode (EP).
The “Filter” indicator lights up when filter is on and flashes when suspended.
Setting economy mode.
FF03
EP 1
F 03
(0 = no filtration, 24 = continuous filtration)
It is not recommended to set this to “0”.
5.11 Setting economy mode*
This mode allows you to lower the temperature set point of the spa by 20 °F (11 °C)
during a certain period of the day. The display will show EPX, “X” representing the state
of the programmed economy (0 = disabled, 1 = enabled). Use the arrow keys to enable
or disable economy mode. Use the Lights key to jump to the next parameter, economy
start time (ES).When the Economy mode is ON, the display will toggle between the
“Eco” message, the time, and the water temperature.
* Note that the parameters for the economy mode settings
are associated to specific low level configuration of the
syslem that are not present in all software revisions.
Summary of Contents for IN.K300
Page 1: ...USER MANUAL IN K300 ...
Page 23: ...23 Notes ...
