SKUD 18
Owners’ Guide
23
Haul down on the rig tensioner until the forestay pin can be inserted, then cleat off.
Secure forestay pin with split pin or snail clip. Uncleat rig tensioner and slowly release
load on to forestay. Remove rig tensioner.
Attach the inner shrouds using the t-ball fittings and attach to the forward hole on the
chainplates drilled with two holes.
Adjust shroud tension to suit the sailing conditions.
Main Halyard
The main halyard exits the mast on the starboard side where the cleat is positioned and
is led through the cowling to a turning block at the base of the mast post.
