44
HANS
™ Premium Water
Appliance
Owner’s
Manual
MAINTENANCE
NOTE:
If a Warning displays on touch screen or app, refer to this section of
manual.
Changing the Stage 1 and Stage 2 Filters
1.
To remove a filter, set the system to bypass
and turn the pump off, or just power off the
system (see Figure 66).
Figure 66. Bypass
2.
Open the drain valves at the bottom of the
filter housings and drain filters into
container. This will alleviate pressure by
draining the water around each filter (see
Figure 67).
Figure 67. Drain valves
3.
Turn filter housing wrench counterclockwise
to remove the large blue filter housings (see
Figure 68).
Figure 68. Filter housings
CAUTION:
Use caution because filter may be slippery, wet, and heavier than
expected.
4.
Remove the old filter from the housing.
5.
Verify replacement filters are the correct size and type.
NOTE:
Only
HANS
™
Premium Water
replacement filters should be used. Use
of filters other than
HANS
™
Premium Water
can alter performance of unit.
