4
English
Assembly
(see page 33)
Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The hot and cold supplies must be of equal pressures.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• The drain valve must only be used as intended. It is
not allowed to attach other objects to the drain valve,
for example a semi-pedestal.
• If the instantaneous water heater causes problems or
if you wish to increase the water flow, the EcoSmart
(flow limiter) located behind the aerator can be
removed.
Technical Data
This mixer series-produced with EcoSmart
(flow limiter)
Operating pressure:
max. 1 MPa
Recommended operating pressure:
0,1 - 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 60°C
Thermal disinfection:
70°C / 4 min
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Adjustment
(see page 37)
To adjust the hot water limiter. Using a hot water limiter in
combination with a continuous flow water heater is not
recommended.
Dimensions
(see page 41)
Flow diagram
(see page 42)
Spare parts
(see page 39)
XXX = Colors
000 = Chrome Plated
670 = Matt Black
Special accessories
(order as an extra)
• special tool #58085000 (see page 33)
• Installation putty (see page 34)
Cleaning
(see page 38)
Operation
(see page 42)
• Hansgrohe recommends not to use as drinking water
the first half liter of water drawn in the morning or
after a prolonged period of non-use.
• After periods of prolonged non-use, but at least every
third day, the fittings must be opened with the handle
in hot and cold position to prevent stagnation in the
connecting lines. Let the water run until the water
temperature is constant.
Test certificate
(see page 44)
Summary of Contents for Vernis Shape 70 71566000
Page 33: ...33 58085000 max 7 Nm Armaturenfett Grease SW 9 mm 1 2 SW 19 mm 4 Nm 3 Nm 6 4 2 3 1 5...
Page 34: ...34 10 8 58085000 max 7 Nm Armaturenfett Grease 50 Ncm 10 2 min 7a 7b 8 9 10 11 13 14 12...
Page 43: ...43 Vernis Shape 70 CoolStart 71593XXX 71535004 Vernis Shape 100 CoolStart 71594XXX...
