Hans Grohe Focus E 31740000, Assembly Instructions Manual

Page: 16 / 175

English
4
Important! The fitting must be installed, flushed and
tested after the valid norms!
Assembly
1.
Flush through the supply pipes.
2. Mount the S - unions and align them.
3. Fasten the mixer with the washers.
Operation
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
32420000: The flow is changed from bath to shower
function by pulling the knob at the upper side of the
spout. After shutting off the water flow, the mixer
returns automatically to the bath function.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure:
1,6 MPa
( 1 MPa = 10 bar = 147PSI )
Hot water temperature:
max. 80° C
Recommended hot water temp.: 65° C
Centre distance:
Connections G ½": cold right - hot left
Rate of flow: ca. 22 l/min 3 bar
anti-pollution function
To adjust the hot water limiter on single lever
mixers, please see page 6.
No adjustment is necessary when using a
continuous flow water heater.
Hansgrohe single lever mixers can be used together
with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 0,15 MPa.
Important!
The non return valves must be checked once a
year.
Spare parts (see page 3)
1 handle
31791000
1.1 screw cover 96338000
2 flange 96656000
3 nut 96690000
4 cartridge cpl. 92730000
5 flange 94135000
6 S - unions 94140000
7 aerator cpl. 13956000
8 selector assy 94077000
9 diverter knob 94078000
10 non return valve 94074000
Test certificate
DVGW P-IX SVGW ACS NF WRAS KIWA
31740000 X
PA-IX
9627/IBB
X X X X X
31753000 X
31760000 X
P-IX
9626/IB
X X X X
31773000 X