Hans Grohe Axor Citterio 39400 Series, Assembly Instructions Manual

Page: 21 / 231

5
Assembly
The hot and cold supplies must be of equal
pressures.
Operation
The mixer is activated by lifting the lever handle.
Turning to the left = warmer water,
turning to the right = cooler water.
32420000: The flow is changed from bath to shower
function by pulling the knob at the upper side of the
spout. After shutting off the water flow, the mixer
returns automatically to the bath function.
Technical Data
Operating pressure:
max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure:
1,6 MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
max. 80° C
Recommended hot water temp.: 65° C
Connections G ½": cold right - hot left
Centre distance:
Rate of flow:
22l/min 0,3 MPa
anti-pollution function
To adjust the hot water limiter on single lever
mixers, please see page 7.
No adjustment is necessary when using a
continuous flow water heater.
Hansgrohe single lever mixers can be used together
with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 0,15 MPa.
Important!
The non return valves must be checked once a
year.
Spare parts (see page 3)
1 handle
39491XXX
1.1 screw cover 96338000
2 flange 96395XXX
3 nut 96461000
4 cartridge cpl. 92730000
5 locking screw for handle 96059000
6 seal 95008000
7 diverter knob 96466XXX
8 aerator cpl. 13956XXX
9 non return valve 94074000
10 selector assy 94077000
11 noise reduction 94073000
12 S - unions 94136000
XXX =
Colors
000 chrome plated
420 platinum