33
English
3.7 Adjusting Setup Settings
1
Press MENU to enter the OSD Main
Menu screen.
2
Press
/
on the remote control or
P
S
/
P
T
on the control panel to select
Setup menu.
3
Press
/
OK
on the remote control or
INPUT
/
VOL+
on the control panel to
enter the Setup menu.
4
Press
/
on the remote control or
P
S
/
P
T
on the control panel to select an
item.
5
Press
/
OK
on the remote control or
INPUT
/
VOL+
on the control panel to enter
the item.
6
Press
OK
on the remote control or
INPUT
/
VOL+
on the control panel to mark an
item or perform a function.
7
Press
MENU
to exit.
8
The Setup menu can be used to adjust the
OSD Language
,
OSD Time
,
Common
Interface
,
SCART1
,
SCART2
,
Mode Setting
,
Hannspree Light
,
First Time Setup
,
and
Recall
settings. The Common Interface is only available when the CI device is
connected. If you want to exit from CI Main menu, please press
Red key
on your
remote control. The SCART1 and SCART2 are only available for adjustments when
the input source is set to
SCART1
or
SCART2
.
• The available OSD languages are:
English
,
Deutsch
,
Français
,
Italiano
,
Español
,
Nederlands
,
Magyar
,
Português
, and
Polski
.
• The OSD Time Out can be set to
10 seconds
,
20 seconds
,
30 seconds
, and
60 seconds
.
• The Common Interface can be used to access the connected CI device.
• The SCART1 can be set to
Auto
,
RGB
,
CVBS
, or
S-Video
.
• The SCART2 can be set to
Auto
,
CVBS
, or
S-Video
.
• The Mode Setting can be set to
Home Mode
or
Store Mode
.
• The Hannspree Light can be set to
Off
,
Low
,
Medium
, or
High
.
• The First Time Setup can be used to adjust the
OSD Language
,
Mode Setting
, and
Country
settings.
• The Recall can be used to restore the Setup settings to the factory defaults.
Note:
The items available on the OSD may vary depending on the input signal source.
Return
Select
Menu
Move
OK
OSD Language
OSD Time
Common Interface
SCART1
SCART2
Mode Setting
Hannspree Light
First Time Setup
Recall
Picture
Audio
Clock / Timer
Channel
Setup
