manualshive.com logo in svg

Hanna Instruments Pool Line HI981914, Instruction Manual, Page: 21 / 56

Share
Download
Hanna Instruments Pool Line HI981914 Instruction Manual Download Page 21

21

METER SETUP

View Calibration Points

Option: Enable or Disable

With item selected, press the functional key to select desired option.
If enabled, the buffers used in the last calibration are displayed on the pH measurement screen.

Out of Calibration Range Warning

Option: Enable or Disable

With item selected, press the functional key to select desired option.
If enabled, when the pH reading is outside the calibration range, the “Out Cal. Range” message is 
displayed.

ISE Probe

Option: 17 standard ISE probes or custom

Press 

Standard

 functional key to select desired probe from the standard probes list. 

Press 

Custom

 functional key to set the parameters for a custom probe.

If 

Standard

 is pressed, press the   /   keys to select desired probe. 

Press 

Accept

 to save or 

ESC

 key to return to the previous screen.

Press 

View

 to see probe parameters then 

ESC

 to return to the probes list screen.

 

 

Summary of Contents for Pool Line HI981914

























































Reviews:

No comments