manualshive.com logo in svg

Hanna Instruments Pool Line HI981914, Instruction Manual, Page: 19 / 56

Share
Download
Hanna Instruments Pool Line HI981914 Instruction Manual Download Page 19

19

METER SETUP

Beep On

Option: Enable or Disable

With item selected, press the functional key to select desired option.
When enabled, a short beep is heard every time a key is pressed or the calibration can be confirmed. 
A long beep alert sounds when the pressed key is not active or wrong condition is detected during 
calibration.

Instrument ID

Option: 0000 to 9999

With item selected, press 

Modify

 functional key. Press the   /   keys to modify the value. Press 

Accept

 to save or 

ESC

 key to return to the Meter Setup menu.

 

Baud Rate

Option: 600, 1200, 2400, 4800 or 9600

With item selected, press 

Modify

 functional key. Press the   /   keys to select desired option. Press 

Accept

 to save or 

ESC

 key to return to the Meter Setup menu.

 

Meter Information

With item selected, press 

Select

 functional key. The instrument displayes: firmware version, language 

version, mV and temperature factory calibration time and date, battery capacity. 
Press 

ESC

 key to return to the Meter Setup menu.

 

Summary of Contents for Pool Line HI981914

























































Reviews:

No comments