Hanna Instruments HI9224, Instruction Manual

Page: 24 / 44

24
TO PRINT STORED DATA
Having selected a log number by using ALT
and CON keys, as detailed in the chapter
"TO SCAN STORED DATA ON DISPLAY" you
can print all or part of that log section by
using the ALT and PRINT keys. The printer
will then start to print the logged section
beginning with the selected sample number
without altering the content of the memory.
Note: It is always possible to print only the
sample shown on the display by pressing
the PRINT key.
For example if 10 samples are stored in the
logging section, use the CON
key to display
sample No. 5.
Sample 5 can be printed on its own using the
PRINT key.
Samples 5, 6, 7, 8, 9 and 10 can be
printed by pressing ALT and PRINT keys.
If you wish to stop the printer during the
download session press the ALT and PAPER
keys and the printer will immediately stop.
Note Before proceeding with printing, make sure there is enough
paper for the data to be printed. When the paper is finished
the meter will not advise the opera-
tor and the printouts could be lost.
If this happens, stop the printer by
pressing ALT and PAPER key simul-
taneously. Data will be kept in
memory.
Insert a new paper roll and repeat the instructions above
starting from the last printed sample number (see chapter
"PRINTER MAINTENANCE" on page 27 for changing paper roll).
CAL CON ALT
PRINT
ALT
PRINT
CON
PRINT
PRINT
ALT
CAL
PAPER
ALT
PRINT
CAL
PAPER
ALT
PRINT