20
LOG
CAL
CON
TIME
LOG
ALT
RANGE
To log without printing press the ALT and the PAPER keys at the
same time and the "LOG" symbol on display will start to blink. Press
ALT and PAPER again to resume logging with printing.
After approximately 5 minutes the display will switch off but the
logging function remains active.
While logging, during the sleep mode, the display will periodically
flash on. This is a normal indication that the meter is in the logging
mode and is currently logging readings.
To reactivate the display press the RANGE key.
Note
Once in the logging mode, the inter-
val cannot be changed. Exit the
logging mode first (pressing the ALT
and the LOG keys) before setting the
new interval.
Note
If the PRINT key is pressed while in
logging mode, a printout is produced with-
out affecting the running sample number.
SAMPLE NUMBER
During logging it is possible to know the running
sample number. Press the LOG key twice and
the display will show the number of values
that have been taken since the start of the
current log.
LOGGING MODE WITH PRINTING
This function is suggested when an immediate report of the measure-
ment is required in addition to the recording of the data into
memory.
Press the ALT and the LOG key simulta-
neously to enter the logging mode. The log
number and page number will appear for a
few seconds on the display to indicate the
correct operational mode. The printer will
CAL
PAPER
ALT
RANGE
CAL
CON
TIME
LOG
ALT
RANGE
LOG
