30
PC INTERFACE
Log data download from the instrument to the PC can be done with the
HI92000
Windows
®
compatible
software (optional).
HI92000
also offers graphing and on‑line help features. Data can be exported
to the most popular spreadsheet programs for further analysis.
To connect your instrument to a PC, use a standard USB cable. Make sure that your instrument is
switched off. Plug one connector to the instrument’s USB socket and the other to the USB port of your PC.
Please reffer to the
HI92000
software to download the data from the instrument.
Beeper
Option: Enabled or Disabled.
This option is used to enable/disable the beeper.
Press the “Enable” functional key to enable or
disable this option.
When enabled, a short beep is heard every time
a key is pressed.
A long beep alert sounds when the pressed key is
not active or an error condition is detected.
Instrument ID
Option: 0 to 9999.
This option is used to set the instrument’s ID
(identification number). The instrument ID is used
while exchanging data with a PC.
Press “Modify” functional key to access the instru‑
ment ID screen. Press the UP or DOWN key in order
to set the desired value. Press “Accept” functional
key to confirm the value or ESC to return to the setup
menu without saving the new value.
Meter information
Press “Select” functional key to view the Instrument
model, firmware version, language version and
instrument serial number.
Press ESC to return to the Setup mode.