28
The instrument’s parameters can be changed in the Setup mode. Some parameters affect the measuring
sequence and others are general parameters that change the behaviour or appearence of the instrument.
The setup mode may be accessed from the main screen by pressing the SETUP key.
Press ESC or SETUP to return to the main screen.
A list of setup parameters will be displayed with currently configured setting. Press HELP
for aditional information.
Press the UP or DOWN key to select the parameter and
depending to the parameter type, select the new value
as follows.
Backlight
Values: 0 to 8.
Press “Modify” functional key to access the backlight value.
Use the “Right” or ”Left” functional key (alternatively,
the UP or DOWN key) to increase or decrease the display
backlight.
Press “Accept” functional key to confirm or ESC to return to
the setup menu without saving the new value.
Contrast
Values: 0 to 20.
This option is used to set the display’s contrast.
Press “Modify” functional key to change the display’s
contrast.
Use the “Right” or ”Left” functional key (alternatively, the
UP or DOWN key) to increase or decrease the value.
Press “Accept“ functional key to confirm the value or ESC
to return to the setup menu without saving the new value.
Average
Option: Enabled or Disabled.
This option is used to enable/disable averaged measuring
mode. If enabled, the instrument takes 10 readings and
display the resulting average value. The partial average is
displayed during measurement.
Press the “Enable” functional key to enable or disable
this option.
SETUP
SETUP
