9
ERRORS AND WARNINGS
The instrument shows clear messages when erroneous condition appears. Messages are also displayed
when the obtained values are outside expected range. The beeper is playing a beep on errors.
a) on zero reading
Light High:
There is too much light to perform a measurement.
Please check the preparation of the zero cuvet.
Light Low:
There is not enough light to perform a measurement.
Please check the preparation of the zero cuvet.
No Light:
The instrument cannot adjust the light level. Please
check that the samples does not contain any debris.
Inverted cuvets:
The sample and the zero cuvet are inverted.
Zero:
A zero reading was not taken. Follow the instructions of
the measurement procedure for zeroing the meter.
b) on sample reading
www.
.com
1.800.561.8187
