manualshive.com logo in svg

Hanna Instruments HI 110, Instruction Manual, Page: 3 / 40

Share
Download
Hanna Instruments HI 110 Instruction Manual Download Page 3

3

PRELIMINARY EXAMINATION

Remove the instrument from the packing material and examine it carefully to

make sure that no damage has occurred during shipping. If there is any

damage, notify your Dealer or the nearest Hanna Customer Service Center.

Each instrument is supplied with:

• 

HI 1131B

 Glass-body Combination pH Electrode with 1 m (3.3') Cable

• 

HI 7669/2W

 Temperature Probe

• 

HI 76404

 Electrode Holder

• 

pH 4.01 & 7.01

 Buffer Solutions (20 mL each)

• 

HI 7071S

 Electrolyte Solution

• 12VDC Power Adapter

• Instruction Manual

Note:

 Save all packing material until you are sure that the instrument

functions correctly. All defective items must be returned in the original

packing with the supplied accessories.

The HANNA

 HI 110

, 

HI 111

, 

HI 112 

and

 HI 113

 are microprocessor-based pH

and Temperature bench meters.

HI 111

 and 

HI 113

 can also measure Oxidation Reduction Potential (ORP) in

mV range. 

Relative mV

 feature is also provided.

pH measurements are compensated for temperature effect manually or

automatically with the 

HI 7669/2W

 temperature probe.

Up to three-point (

HI 110

, 

HI 111

) or up to five-point (

HI 112

, 

HI 113

)

calibration is possible. In addition, two custom buffers can be set and used

during calibration.

The 

GLP

 feature provides a guarantee of data consistency.

An alarm time-out is available to alert the user that too much time elapsed

since the last pH calibration.

Through the RS232 serial port data can be transferred to a PC (

HI 112

, 

HI 113

).

Hanna Instruments reserves the right to modify the design,

construction and appearance of its products without advance notice.

GENERAL DESCRIPTION

Summary of Contents for HI 110









































Reviews:

No comments