![background image](http://html1.mh-extra.com/html/hanna-instruments/hi-110/hi-110_instruction-manual_591053020.webp)
20
Press
RANGE
. The day will start blinking.
Press the
ARROW
keys to change the day.
Press
CFM
to save the modified value.
Press
CAL
to escape without saving.
BEEP STATUS SET
Press
CAL
when the beep status is displayed. Beep status (On or OFF) will
start blinking.
Press the
ARROW
keys to change the beep status (On or OFF).
Press
CFM
to save the modified beep status.
Press
CAL
to escape without saving.
BAUD RATE SET (HI 112, HI 113 only)
Press
CAL
when the baud rate is displayed. The baud rate (600, 1200, 2400,
4800 or 9600) will start blinking.
Press the
ARROW
keys to change the baud rate value.
Press
CFM
to save the modified baud rate value.
Press
CAL
to escape without saving.
SERIAL COMMUNICATION COMMAND PREFIX SET
(HI 112, HI 113 only)
Press
CAL
when the command prefix is displayed. The command prefix (0 to
47) will start blinking.
Press the
ARROW
keys to change the command prefix.
Press
CFM
to save the modified command prefix value.
Press
CAL
to escape without saving.
Note:
See the PC interface section on page 25 for a complete explanation.
The command prefix must be 16 if
HI 92000
PC software is used.
DATE