manualshive.com logo in svg

Hanna Instruments HI 110, Instruction Manual, Page: 2 / 40

Share
Download
Hanna Instruments HI 110 Instruction Manual Download Page 2

2

WARRANTY

HI 110

, 

HI 111

, 

HI 112

 and 

HI 113 

are guaranteed for two years against

defects in workmanship and materials when used for their intended purpose and

maintained according to instructions. Electrodes and probes are guaranteed for

six months.

 

This warranty is limited to repair or replacement free of charge.

Damage due to accidents, misuse, tampering or lack of prescribed maintenance

is not covered.

If service is required, contact the dealer from whom you purchased the

instrument. If under warranty, report the model number, date of purchase,

serial number and the nature of the problem. If the repair is not covered by

the warranty, you will be notified of the charges incurred. If the instrument is

to be returned to Hanna Instruments, first obtain a Returned Goods Authori-

zation number from the Technical Service department and then send it with

shipping costs prepaid. When shipping any instrument, make sure it is

properly packed for complete protection.

Dear Customer,

Thank you for choosing a Hanna Instruments product.

Please read this instruction manual carefully before using the instruments.

This manual will provide you with the necessary information for correct use of

the instruments, as well as a precise idea of their versatility.

If you need additional technical information, do not hesitate to e-mail us at

[email protected] or turn to the back cover for our worldwide contact list.

These instruments are in compliance with   directives.

TABLE OF CONTENTS

WARRANTY ......................................................................................................................... 2

PRELIMINARY EXAMINATION .............................................................................................. 3

GENERAL DESCRIPTION ..................................................................................................... 3

FUNCTIONAL DESCRIPTION 

HI 110

 AND 

HI 111

 ............................................................. 4

HI 110

 AND 

HI 111

 SPECIFICATIONS .............................................................................. 5

FUNCTIONAL DESCRIPTION 

HI 112

 AND 

HI 113

 ............................................................. 6

HI 112

 AND 

HI 113

 SPECIFICATIONS .............................................................................. 7

OPERATIONAL GUIDE ......................................................................................................... 8

pH CALIBRATION ................................................................................................................ 10

GOOD LABORATORY PRACTICE (GLP) ...................................................................................15

SETUP .....................................................................................................................................17

TEMPERATURE CALIBRATION (for technical personnel only) ........................................... 21

mV CALIBRATION (for technical personnel only, 

HI 111

 AND 

HI 113

) ........................... 23

RELATIVE mV CALIBRATION (

HI 111

 AND 

HI 113

) ....................................................... 24

PC INTERFACE (

HI 112

 AND 

HI 113

) ............................................................................ 25

pH BUFFER TEMPERATURE DEPENDENCE ..................................................................... 27

ELECTRODE CONDITIONING & MAINTENANCE .................................................................. 28

TROUBLESHOOTING GUIDE ............................................................................................... 31

TEMPERATURE CORRELATION FOR pH SENSITIVE GLASS ............................................... 32

ACCESSORIES ...................................................................................................................... 33

Summary of Contents for HI 110









































Reviews:

No comments