![background image](http://html.mh-extra.com/html/hanna-instruments/edge/edge_instruction-manual_591686022.webp)
Setup/Installation
22
Viewing
Logged Data
If no data was logged for the selected measurement
range, the instrument displays the following
messages (ex. for pH range):
No Manual Logs
No Stability Logs
Press CFM to enter inside lot information to view memorized records.
Use the ARROW keys to toggle between different records.
Use
u
to display GLP data.
Press CLR then CFM when deleting records or lots.
Press RCL to exit the lot you are viewing.
Press RCL to return to the measurement screen.
Delete Record/Lot
Press RCL and select measurement log.
Use the
p q
keys to select the Manual/Stability
records or Interval lots to delete. The instrument will
display “CLEAR MANUAL” for MANUAL, “CLEAR STAB”
for STABILITY.
For Interval lots, the message “Clear” followed by the
selected lot will be displayed with “CFM” tag blinking.
Press the ARROW keys to select a different lot. Press
CFM. The instrument will display “PLEASE WAIT”.
For Interval, use the
p q
keys to select a different
lot. Press CFM. The instrument will display “PLEASE
WAIT”.
“CLEAR DONE” is displayed for a few seconds after
the selected Interval lot is deleted.
Summary of Contents for Edge
