Hanlin Electrical JQ-HL001, Instruction Manual

Page: 8 / 10

5. Maintaining and Cleaning.
⚫
Note: Unplug the AC Power Cord prior to cleaning induction cooker. Do not use any
caustic cleaning agents or abrasive scrubbing pads on the Unit.
⚫
To protect yourself from electric shock, NEVER immerse the device, or the AC Power
Cord in water or other liquids.
⚫
Wipe off the ceramic plate with a warm, damp cloth and a mild, nonabrasive soap
solution.
⚫
Wipe off the outer Unit housing and the Control Panel with a soft cloth or a mild
detergent.
⚫
DO NOT use any petroleum products which will damage the outer Unit housing and the
Control Panel.
⚫
DO NOT use/store any flammable, acid or alkaline materials or substances near the
device, as this may reduce the service life of the device and lead to deflagration (fire)
when the device is turned on.
⚫
Make sure that the bottom of the cookware does not scrape across the surface of the
Cooktop. A scratched surface will not impair the use of the device.
⚫
Make sure that the device is properly cleaned before storing it in a dry place.
⚫
DO NOT stack many heavy objects on top of the Unit. Excessive weight could possibly
damage the Unit.
⚫
If the appliance is constructed so that it is not protected against water jets, clear and
detailed instructions for the user shall be delivered together with the appliance. It shall be
stated in the instructions that this appliance shall not be cleaned with a water jet.
⚫
any other servicing should be performed by an authorized service representative.
WARNING
Caution, hot surface
Induction heating surfaces heat very rapidly. Avoid
burn hazard.
WARNING
Caution, do not touch
Induction heating surfaces heat very rapidly. Do not
touch the hot surface.
WARNING
Caution, pay attention
Be careful and pay attention when operating the
induction cooker.