background image

 

a) A short power-supply cord (or detachable power-supply cord) is provided to reduce the 

risk

 

resulting from becoming entangled in or tripping over a longer cord. 

b)  Longer  detachable  power-supply  cords  or  extension  cords  are  available  and  may  be 

used if care

 

is exercised in their use. 

c) If a longer detachable power-supply cord or extension cord is used: 

1) The marked electrical rating of the cord set or extension cord should be at least as great 

as the electrical rating of the appliance; 

2) The cord should be arranged so that it will not drape over the countertop or tabletop 

where it can be pulled on by children or tripped over unintentionally; and 

3) If the appliance is of the grounded type, the cord set or extension cord should be a 

grounding

-

type 3

-

wire cord. 1.

 

 

 

 

This appliance has a polarized plug (one blade is wider than the other). To reduce the

 

risk of electric shock, this plug is intended to fit into a polarized outlet only one way. 

If  the  plug  does  not  fit    fully  into  the  outlet,  reverse  the  plug.  If  it  still  does  not  fit, 
contact a qualified electricianDo not attempt to modify the plug in any way."

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Black crystal glass 

Plastic shell 

Control Cable 

Summary of Contents for JQ-HL001











Reviews: