1.1 Safety
2. Check the voltage to be used, before connecting the centrifuge to the power source.
5. Make sure to prepare necessary safety measures before using samples that are toxic or radioactive samples
or pathogenic or samples or infectious blood.
Follow precautions and all the safety requirements described on this user manual to prevent any damage
and failure of equipment and loss of lives.
1. The centrifuge should be installed on flat surface to maintain level.
Abnormal vibration is caused when the device is installed on an inclined surface.
3. Only use rotors, parts, and accessories provided by Hanil Science INC.
Hanil Scientific INC. is not responsible for damages of the device and accidents caused by using parts and accessories
not recommended.
4. Do not exceed the maximum rated speed of the rotor or buckets in use.
7. Substances that may generate volatile or explosive vapor can not be centrifuged.
8. The balancing work of samples shoud be done in advance before operation.
6. If the centrifuge is contaminated by toxic or radioactive samples or infectious blood samples, remove contaminants completely
and take needful actions such as ventilation or isolation of centrifuge.
9. Before operation, rotor and chamber should be dry.
10. Do not attempt to slow or stop the spinning rotor by hand.
11. Only centrifuge with rotor and rotor lid firmly tightened.
12. Do not block vents.
13. When serving the centrifuge, be sure to remove contaminants in advance.
16. Please contact the place of purchase for product repairs.
15. According to IEC61010-2-020 maintain a 30cm “clearance envelope” around the centrifuge while the rotor is spinning.
14. Repairs must be carried out by a technologist authorized by Hanil scientific INC.
1. General Considerations
www.ihanil.com
│ 2
