5. Maintenance
5.1 Care instructions
•
The following procedures should be performed regulary.
①
Regularly inspect the rotor chamber for check the motor shaft is nomal.
②
Rotate the shaft with your hand to make sure it turns smoothly
③
Use the stopwatch to check that the time setting is correct
5.1 Cleaning
·
• Before cleaning the centrifuge, be sure to switch off the device and disconnect the power cord.
•
Oustside of the device
①
Clean the outside of equipment with a soft and dry cloth.
②
Do not use aggressive chemicals on the device such as alchol, benzene, acetone or phenol.
③
Use the stopwatch to check that the time setting is correct
▶
If the device is contaminated, use a mild cleaning fluid to clean.
④
Make sure do not scratch the surface of equipment when cleaning it.
▶
Do not use a metal sponge.
▶
If the device is rusted, remove it with a mild detergent and wipe it with a dry cloth.
•
Chamber
①
If the rotor chamber is not dry, wipe moisture from the chamber with a dry cloth.
②
If the rotor chamber is dirty, wipe moisture from the chamber with a dry cloth.
•
Rotor
①
To prevent corrosion, take out the rotor from the rotor chamber.
②
If any sample is spilt inside the rotor, wash and dry the rotor well.
•
Disposal
In case of product is to be disposed of, the local wastes laws and regulations ard to be observed.
│ 13
