Hanil Smart 13, Operation Manual

Page: 13 / 20

Tech. Support : 02-3452-8966 / techsupport@ihanil.com
13/18
4.2 Setting RPM
[A2.0-12 rotor]
[Start]
[Stop]
[A0.2-32 rotor/A5.0-6 rotor]
4.3 Setting Run Time
4.4 Starting/End the Centrifugation
4.5 Pulse
1. Rotate the 'RPM setting knob' clockwise or counterclockwise to set the rpm value.
▶ 0~13,500 RPM
1. Press the 6K RUN button to start operation at 6,000 rpm
▶ Do not exceed 6,000 rpm.
1. Rotate 'Time setting knob' clockwise or counterclockwise to set the run time.
▶ 0~15 min
1. After setting the RPM and run time, close the lid and press the start button.
▶ If the lid is not completely closed, it will not operate.
▶ When the set time is over, the device is decelerated and stopped with beep sound.
1. While operation, press the Start/Stop button or 6K Run button to stop operation.
▶ While operation, rotate the RPM setting knob to '0' to stop operation.
▶ When the lid is opened during operation, operation stopped.
1. Set the RPM
2. Set the Time setting knob to '0'.
3. Press the Start button.
4. The device decelerates and stops when the set rpmis reached.
4. Operation