Hanil Smart 13, Operation Manual

Page: 10 / 20

www.ihanil.com 10/18
3. Installation
3.5 Loading and Removal of the Rotor
· This device is equipped withthe rotor .
· Only use rotors, parts, and accessories provided by Hanil Scientific Inc .
· Do not use a defective rotor.
1. Using a flat head screwdriver, turn the rotor locking screw counterclockwise and pull
it completely out with the washer under the screw.
2. Lift up the rotor from the motor shaft.
3. Load the rotor into the motor shaft.
4. Align the washer with the hole at the top of the rotor.
5. Insert the rotor lock screw into the screw hole in the center of the rotor and turn it
clockwise using a flat head screwdriver to completely lock it.
6. Check that the rotor is completely locked.
Follow the steps below to remove or replace the rotor.
Flat head screwdriver
Rotor lock screw
Washer
Rotor
Rotor Hub