Hanil Smart 13, Operation Manual

Page: 4 / 20

www.ihanil.com 4 /18
1. General Considerations
Follow precautions and all the safety requirements described on this user manual to prevent any
damages, failure of equipment and loss of lives.
1. The centrifuge should be installed on flat surface to maintain level.
Abnormal vibration is caused when the device is installed on an inclined surface.
2. Check the voltage to be used, before connecting the centrifuge to the power source.
3. Only use rotors, parts, and accessories provided by Hanil Scientific Inc. Hanil Scientific Inc. is not responsible
for damages of the device and accidents caused by using parts and accessories
not recommended.
4. Do not exceed the maximum rated speed of the rotor or buckets or accessories in use.
5. Make sure to prepare necessary safety measures before using samples that are toxic or radioactive samples
or pathogenic or samples or infectious blood.
6. If the centrifuge is contaminated by toxic or radioactive samples or infectious blood samples, remove
contaminants completeyly and take needful actions such as ventilation or isolation of centrifuge.
7. Substances that may generate volatile or explosive vapor can not be centrifuged.
8. The balancing work of samples shoud be done in advance before operation.
9. Before operation, rotor and chamber should be dry.
10. Do not attempt to slow or stop the spinning rotor by hand.
11. Only centrifuge with rotor and rotor lid firmly tightened.
12. Do not block vents.
13. Do not insert foreign objects into the holes of the device.
14. Repairs must be carried out by a technologist authorized by Hanil scientific Inc.
15. According to IEC61010-2-020 maintain a 30cm“clearance envelope”around the centrifuge while
the rotor is spinning.
16. Please contact the place of purchase or Hanil Scientific Inc. (techsupport@ihanil.com/info@ihanil.com)
for product repairs.
17. Turn the power switch off after using the device.
18. Unplug the power plug before cleaning or left unused for a long period of time.
1.1 Safety