Hanil M 13, Operation Manual

Page: 10 / 20

3. Installation
3.5 Loading and Removal of the Rotor
Follow the steps below to remove or replace the rotor.
Flat head screwdriver
Rotor lock screw
Rotor
Rotor Hub
10/20 www.ihanil.com
Tapered washer
1. Using a flat head screw driver, turn the rotor locking screw counter-clockwise and
pull it completely out with the washer under the screw.
2. Lift up the rotor from the motor shaft.
3. Load the rotor into the motor shaft.
4. Align the washer with the hole at the top of the rotor.
5. Insert the rotor lock screw into the screw hole in the center of the rotor and turn it
clockwise using a flat head screwdriver to completely lock it.
6. Check that the rotor is completely locked.
· This device is equipped with a rotor .
· Only use rotors, parts, and accessories provided or validated by
Hanil Sciedntific Inc.
· Do not use defective rotor.