Hanil M 13, Operation Manual

Page: 13 / 20

4.2 Setting RPM
[A2.0-12 rotor]
[Start]
[Stop]
[A0.2-32 rotor/A5.0-6 rotor]
4.3 Setting Run Time
4.4 Starting/End the Centrifugation
4.5 Pulse
4. Operation
13/20
1. After setting the RPM and run time, close the lid and press the start button.
▶ If the lid is not completely closed, it will not operate.
▶ When the set time is over, the device will decelerate and stop with beeping sound.
1. While operation, press the Start/Stop button to stop operation.
▶ While operation, rotate the RPM setting knob to '0' to stop operation.
▶ When the lid opens during operation, operation will stop.
1. Rotate 'Time setting knob' clockwise or counter-clockwise to set the run time.
▶ 0~15 min
1. Starting the centrifuge with setting the time knob to '0' will reach the RPM that is set
and decelerate to stop.
▶ Turning the RPM setting to '0' while centrifuge is operating, deceleration will progress to stop.
▶ Opening the lid while centrifuge is operating, deceleration will progress to stop with beeping sound.
1. Rotate the 'RPM setting knob' clockwise or counter-clockwise to set the RPM value.
▶ 0~13,500 RPM
1. Press the 6K RUN button to start operation at 6,000 RPM
▶ Do not exceed 6,000 RPM.
Technical Enquires :
+
82-2-3452-8966 / techsupport@ihanil.com