2
Hangzhou Conloon Electric Co.,Ltd
Contact:May Huang | Tel: +86-571-81600072 | MB:+86-15257589302
E-mail : [email protected] |Skype: conloon | web: www.conloon.com
1. Carefully read the instruction manual and pay attention to the following safety
instructions.
2. Keep the construction manual for future reference.
3. Check whether the mains voltage matches the one on the label of the device.
4. Do not pull the mains plug in order to unplug the device from the socket.
5. The socket has to be earthed and appropriately secured.
6. The building dryer must not be covered when used. Do not put clothes or other
object on it . Only use the dryer on sturdy and even ground.
7. Repairs must be carried out by qualified experts with appropriate knowledge
about the product.
8. Do not use adapter, additional connections or connecting plugs to connect the
device with an electricity supply.
9. Do not put the device close to sources of heat,like radiators,radiant heaters etc.
10. Don't expose the product to direct sunlight or bad weather,like wind,storm& rain.
11. Do not use the products close to chemicals and acids. Those might damage the
collection container or even the whole device.
12. Unplug the device if it is not used for a longer period or you want to clean it.
13. If you want to use the permanent drainage, make sure that the hose is not
bended and the water can flow through unhindered. Do not use permanent
drainage when temperature are very low and the water could freeze.
14. Make sure not to damage or run over cables when moving the device.
15. Protect the device from splashing water.
16. Unplug the device if problems like smell of burning occur while using it.
17. Only use an earthed standard socket with a 220-240V AC connection.
18. Make sure that neither dryer, nor mains plus,nor socket is dusty.
