Page
4
of
5
©HangmanSystems, LLC. Rev.1.17.
NOTES:
Please be aware of how much the Original Hangman™ XXL Triple Secure™ storage
system and its contents weigh. You don’t want to overload the closet rod or pull the rod
brackets or closet system from the wall. The strongest points are usually on either side of
a support bracket and where the rod is supported by the wall. You can install (or you can
ask your management company to install, if you are a renter) additional closet rod
support brackets. Hangman Systems, LLC is not responsible for damage to closets,
structures or personal items caused by overloading the item from which the Original
Hangman™ Triple Secure™ storage system is suspended.
Use the hook & loop fasteners to secure the gun barrels to the UNIT. Failure to use the
use the hook & loop fasteners may allow the guns to fall out of the storage system when
the door is opened. MAKE SURE ANY FIREARM IS UNLOADED BEFORE
STORING IN Original Hangman™ XXL Triple Secure™ storage system.
Most closet rods are easily removed from the rod end support brackets (once the clothes
are removed). To make removal of the closet rod (and therefore removal of the Original
Hangman™ Triple Secure™ storage system from the closet rod), you may consider
securing the closet rod to its end mounts or support brackets. For example, you may be
able to insert a screw or nail into the wall (preferably into a wall stud) above the end of
the closet rod to make removal of the rod more difficult. HOWEVER, you are
responsible for any damage you may cause to the closet or other structures. This
especially important if you are a renter. Proceed with caution.
