Page
1
of
5
©HangmanSystems, LLC. Rev.1.17.
You are now the proud owner of the Original Hangman™ Triple Secure™ XXL storage system.
Please read these assembly instructions carefully.
ASSEMBLY
To minimize shipping costs, your storage system is sent to you with some assembly required.
You will need to install the Hanger and Hook to complete your storage system. If you also
purchased a QuickBag, you will need to combined those installation instructions with these
assembly instructions. The process is simple and requires no tools (although pliers may make
installing the cotter pins easier). Simply follow the instructions below.
Everything you need to assemble your Original
Hangman™ Triple Secure™ storage system for hanging
in your closet is shown in this photo. The parts are 1-
locking UNIT, 1-HANGER, 1-HOOK with CABLE
LOCK, 2-WASHERs, and 2-COTTER PINs.
Take a moment to look where you will hang the Original
Hangman™ Triple Secure™ storage system to decide if
the HOOK should open to the right or left. (It is simple
to change the direction of the HOOK whenever you want
to.)
