
- 18 -
SYNCHRONY™ PROGRAM EQUIPMENT USER MANUAL
© COPYRIGHT 2015, ACCELERATED CARE PLUS CORP., ALL RIGHTS RESERVED
CONFIDENTIAL AND PROPRIETARY
Electrode Setup – Connecting the sEMG Sensors
Remove OMNIsEMG
™
sensor from charging station and swipe over the magnet
on the charging station to activate (slowly flashing white LED = active).
Snap the lead wires into the sensor and then remove the electrode patch from the
plastic liner card.
Attach the lead wire to the electrode snap by squeezing the clip and releasing onto
the post.
Prepare the patient’s skin by thoroughly cleaning the area of application using the included Prep Pad.
Allow the skin to fully dry before applying the electrode.
Clip the OMNIsEMG
™
sensor to the patients clothing in a location that minimizes stress on the lead wires.
Review the electrode labeling for care and use of electrodes, including application, removal and re-use if
applicable.