HANGCHA GTHZ120, Operation Manual

Page: 39 / 48

36
AWP Operation
Lift Traveling in transport and working conditions
Before moving and using the lift, remove the lift body rotation stop dowel where
necessary (Figure A).
The switch 2 (Figure B) should be set to position A (platform/basket control)
There are two traveling modes for the aerial work platform:
-Transport condition: In this condition, all folding booms of the aerial work platform are in
the lowest position. The lift can travel at the maximum speed and climb. (Figure C)
-Working condition: In this condition, one or more folding booms of the aerial work
platform are lifted or the telescopic boom is extended. The lift travels at the minimum
speed.
The angle sensor and overload warning device are activated. (Figure D)