32
38.
Make certain the load is well stacked and
evenly positioned across both forks. DO NOT
attempt to lift a load with only one fork.
On the truck with an attachment such as a
load grab, make certain the load is securely
and correctly grabbed, and pull the loading
control level to the full (increase to relieve
pressure).
39.
Never lift loads when the truck is on an
incline. Avoid loading work on a grade.
40.
DO NOT stack loads on forks in such a
way that the top of the load exceeds the load
backrest height. If this is unavoidable, make
the load as secure as possible. When
handling bulky loads that restrict vision,
operate the truck in reverse or have a guide
41.
Use minimum forward and reverse tilt
when stacking and unloading loads. Never tilt
forward unless the load is over stack or at a
low lift height.
When stacking loads on a high place,
make the mast vertical when load is 15 to 20
cm above the ground before lifting the load
further. Never attempt to tilt the mast beyond
vertical when the load is raised high.
To unload loads from a high place, insert
forks into the pallet and drive backwards, then
lower the load. Tilt the mast back after
lowering. Never attempt to tilt the mast with
the load raised high.
42.
DO NOT tow a truck that has engine
problems, or whose steering system
doesn‘t
work properly, or if its braking system has
been disabled.
Obey all traffic rules when towing the
truck.
43.
Dress appropriately for operating the truck
(overalls or other protective uniforms, safety
helmet, safety shoes etc.). Avoid wearing
neckties or other articles of clothing which
may present a hazard if they come into
contact with truck components.
44.
The workplace should be equipped with a
fire extinguisher. In order to provide easy
access to it, the fire extinguisher is usually
installed on the safety frame rear supporting
leg. The operator should be familiar with
position of the fire extinguisher and its use.
45.
Use a pallet when carrying small goods
instead of the forks.
46.
There are labels on the machine that
display warnings and describe methods for
operating the lift truck. When operating the
machine, observe and follow all markings on
the machine in add
ition to this operator‘s
manual.
Replace damaged or missing decals and
name plate.
47.
HANGCHA provides various attachments
to the user, like rotating clamp, side shifter, jib
and so on, which are for special use. If
attachment configuration needed, it must be
admitted by the factory. It is forbidden to
configure attachment by yourself.
Replace damaged or missing decals and
name plate.
WARNING
Exhaust from internal combustion engines
contains car-bon monoxide and other harmful
chemicals. Carbon monoxide is a colorless,
odorless
poison
and
can
cause
unconsciousness or death without warning.
Long-term exposure to exhaust or chemicals
in the exhaust can cause cancer, birth
defects, and other reproductive harm. Avoid
exposure to engine exhaust.
If engines are operated in confined spaces,
maintain adequate ventilation or vent exhaust
to the outside. DONOT exceed applicable air
contaminant limits.
Follow the inspection and maintenance
schedule and procedures in this manual and
engine manual. DO NOT alter exhaust,
ignition, or fuel systems.
