24
extended correctly.
Prohibit use the belt knotted or twisted.
To tie the belt in the daily operation will
protect you when the truck turn over and
reduce the harm.
·
Unfasten the belt
Use left pollex to press the red button (with
the word PRESS)
in the socket, it‘s untied.
·
Check the belt
Regularly check the bolt of the fixed belt if it
becomes loosened. Don‘t put the belt in the
hard or frangible objects and prevent from
grinding with the sharp blade to avoid any
damage. It is prohibited to remove any parts
of the belt. The belt, used frequently, often
needs to be checked.
cut or frayed straps.
worn or damaged hardware, including
anchor points.
buckle or retractor malfunction.
loose stitching.
If find it abnormal, please change the new belt
immediately. The service life of the belt is
three years, so reject it in advance if it‘s
abnormal.
Overhead guard
DO NOT operate forklift without the overhead
guard. It is designed to protect the operator
from falling objects and meets the safety
standard.
Lock components
To avoid opening the hood at discretion, a
snap close is set here. Open the snap close
first then the hood can be open.
Optional
：
To avoid opening the hood at
discretion, the truck is equipped with lock.
Use the key to open the hood.
Hood
The hood can be swung up fully to provide
easy maintenance service. You can lift up the
hood with little effort with an aid of hood
damper.
1
2
WARNING
To lock the hood, press the red button on the
air spring pipe. The lock button is unstuck this
time, then push down the button on the front
of hood until you hear a rattling sound. It
means the hood is locked.
Caution
The hood needs key to open of CE truck.
Turn the key to horizontal position,
and then press the key forward to open
hood.
Use caution not to catch your fingers in the
hood while closing it.
Warning
While performing maintenance under the
hood, the engine must be off to avoid injury to
hands or other body parts. The engine can be
running in order to troubleshoot some
problems, however, DO NOT place body
under hood while it is running.
