26
Hydraulic fluid reservoir cap
The hydraulic fluid reservoir cap is located on
the right side of the hood. Open the engine
hood when adding oil. Fill hydraulic fluid
through this filler port and lock the cap after
filling hydraulic fluid.
Fuel reservoir cap
Fuel reservoir cap with lock
The fuel reservoir cap is located on the rear
left side of the truck body. The fuel reservoir
cap has a breather inside it to allow air to
enter the reservoir. Check to see that the
breather is in good condition every time fuel
is added.
Caution
1.
Stop the truck, shut down the engine
and apply the parking brake securely. Make
sure there is no naked flame near the area.
DO NOT smoke while handling fuel. DO
NOT remain seated when adding fuel.
2. After adding fuel, securely close the
reservoir cap. A loose cap could cause a
fuel leak or lead to a fire hazard.
3. Before starting the engine, make
sure no fuel has spilled on or around the
truck.
4. NEVER use light flame to check the
fuel level.
Rearview mirror
There are rearview mirrors on the upper right
of overhead guard for operator to see behind
the truck.
Head lamp
Disassembly and assembly of the head
lamp
1. Dismantle the decorative frame;
2. Screw the four bolts at the back of the
lamp shell and open the lamp shell;
3. Cut the lead wire, loosen the lock
button, remove the lamp, change a new
lamp and install back;
4. Loosen the two fixed bolts of the LED
style side lamp, take out the lamp,
check if the lamp is damaged. If it is, cut
the lead-out wire close to the welding
spot, change the new plate, weld again
in the original place and fit it back;
5. Rotate the turn signal lamp according to
the arrowhead in the back of the sear.
Take out the lamp, change the new one
and put it back.