HANGCHA CBD20-AEC1 Operation And Maintenance Manual Download

Page: 74 / 96

Adjust Safety Pressure of

Adjust Safety Pressure of Overflow Valv

Overflow Valve

The default safety pressure of overflow valve in the system is 18.0MPa. It has been set before

the delivery and users do not need to adjust. Here below states the adjusting method of the

safety pressure.

Procedure:

–

Remove the oil choking of the

Remove the oil choking of the pressure hole.

pressure hole.

–

Connect the oil pressure gauge to the pressure hole.

–

Take out the cap of the overflow valve.

–

Loosen the nut of the

Loosen the nut of the main safety valve.

main safety valve.

–

Adjust the pressure and the bolt

Adjust the pressure and the bolts with a hexagon wrench. The pressure of main safet

s with a hexagon wrench. The pressure of main safety valve

y valve

increases when adjusting the screws clockwise; and the

increases when adjusting the screws clockwise; and the pressure decreases when adjusting

pressure decreases when adjusting

the screws

the screws countercloc

counterclockwise

kwise

–

Adjust the pres

Adjust the pressure to the re

sure to the requested rang

quested range.

–

Once completed, apply back the fastened nut and the

Once completed, apply back the fastened nut and the oil choking and clean it up.

oil choking and clean it up.

https://www.besttruckmanuals.com/

Summary of Contents for CBD20-AEC1

































































































Search results

Summary of Contents for CBD20-AEC1

Reviews:

Related manuals for CBD20-AEC1

Brands by name

Popular brands

HANGCHA CBD20-AEC1, Operation And Maintenance Manual

Search results

Summary of Contents for CBD20-AEC1

Reviews:

Related manuals for CBD20-AEC1

Brands by name

Popular brands