HANGCHA CBD20-AEC1 Operation And Maintenance Manual Download Page 33

Page: 33 / 96

4.4

4.4 Replacing

Replacing the

the battery

battery

Procedure:

–

Park the forklift in a

Park the forklift in a safety place as required.

safety place as required.

–

Open the battery cover(10).

–

Pull the battery plug (38) from

Pull the battery plug (38) from the forklift socket. Put the plug

the forklift socket. Put the plug and cables into the battery box

and cables into the battery box

(37).

(37). Do

Do not scratch

not scratch the cables

the cables when

when taking out

taking out the

the battery.

battery.

–

Remove the grub screw (40) and fixed block

Remove the grub screw (40) and fixed block (41).

(41).

–

Connect the lifting device with the two

Connect the lifting device with the two lifting holes of the battery box (37)

lifting holes of the battery box (37) and fasten them.

and fasten them.

–

Pull the battery out of the box vertically by using of a crane.

–

Install the battery in the reverse sequences. Pay attention to the loading position of the

battery and the wiring. Make sure they

battery and the wiring. Make sure they are correct.

are correct.

WARNING



Battery box is very heavy, be careful to avoid damage.



Make sure the lifting capacity of the crane is larger

Make sure the lifting capacity of the crane is larger than battery weight.

than battery weight.



Disposal to the

Disposal to the waste battery should accord with local

waste battery should accord with local environment regulation.

environment regulation.



When replacing the battery, ensure that a battery of the same specification,

dimension and weight is fitted.

https://www.besttruckmanuals.com/

Summary of Contents for CBD20-AEC1

































































































Search results

Summary of Contents for CBD20-AEC1

Reviews:

Related manuals for CBD20-AEC1

Brands by name

Popular brands

HANGCHA CBD20-AEC1, Operation And Maintenance Manual

Search results

Summary of Contents for CBD20-AEC1

Reviews:

Related manuals for CBD20-AEC1

Brands by name

Popular brands