HANGCHA CBD20-AEC1 Operation And Maintenance Manual Download Page 39

Page: 39 / 96

Slow down

–

Slowly loosen the thumb, the direction speed control button will return automatically and the

truck slows down.

Stand-on type

–

Start up the truck

–

Open the pedal

–

Step on the pedal

–

Swivel the control handle to driving range (F).

–

Adjust the dir

Adjust the direction speed

ection speed control button (1

control button (17) to the desir

7) to the desired direction

ed direction

–

Control truck speed by direction speed control button (17). Speed is controlled by rotating the

driving switch, and the maximum rotation can get fast speed.

Others refer to

Others refer to pedestrian-

pedestrian-type contents.

type contents.

https://www.besttruckmanuals.com/

Summary of Contents for CBD20-AEC1

































































































Search results

Summary of Contents for CBD20-AEC1

Reviews:

Related manuals for CBD20-AEC1

Brands by name

Popular brands

HANGCHA CBD20-AEC1, Operation And Maintenance Manual

Search results

Summary of Contents for CBD20-AEC1

Reviews:

Related manuals for CBD20-AEC1

Brands by name

Popular brands